Laser Cut Name Plate Templates Professional Paint Body

For high-volume shops, our emblem recycling system can result in tremendous savings in replacement repair part costs while allowing for the re-use of vehicle badges and emblems.

We are an approved supplier of Franmars environmentally friendly automotive adhesive remover, which can remove all traces of the original adhesive without any noxious fumes Dont spend hours with a razor blade or hundreds of dollars on new emblems.

Laser Cut Name Plate Templates Professional Paint Body

Let us help you put the finishing touches on a professional paint body repair today.

It comes in three pieces, and you need to glue the two side pieces to the front piece.

I used 18 baltic birch plywood, but if you use a different thickness, you will need to adjust the size of the interlocking cutouts.

Add Tip Ask Question Comment Download Step 1: Download and Customize Template Download the attached SVG or PDF file (both are included in the ZIP archive).

I would suggest editing it in Inkscape, exporting a PDF, then importing the PDF into Corel for laser cutting.

You can also just import the PDF here directly into Corel and editing it that way.

You can add vector or raster images as artwork for your project.

For all objects you want to engrave, use a fill but no outline.

For all objects you want to cut out, use no fill but add an outline, and make sure the outline has width hairline in Corel Draw.

The colors for each depend on your specific laser cutter settings, but I like to use pure black (000000) for engraving and pure red (FF0000) for vector cuts.

Attachments desksigntemplate.zip Download Add Tip Ask Question Comment Download Step 2: Fire the Laser Use your laser cutter to engrave and cut the design.

Depending on the software driver for your particular laser, you might need to adjust the color settings.

In my template I used pure black for the parts to engrave, and pure red for the parts to vector cut.

Depending on your material of choice, you might have to play around with the speed and power settings for the engraving and vector cutting.

If you arent using 18 thick material, you will have to adjust the size of the interlocking fingers between the three pieces.

I made it at TechShop, specifically the new Pittsburgh, PA location Add Tip Ask Question Comment Download Step 3: Glue the Pieces Together When the laser cutter is finished, you can glue the pieces together.

I would suggest doing one side at a time, to ensure that everything stays properly aligned at right-angles while the glue dries.

Here are a few more photos so you can get an idea of how they fit together.

There is a little gap at the bottom of the front plate, and I might try to eliminate that in my next design.

A friend recently sent me this link, and Ive been meaning to try it 0 masterleo.

That is the entire reason I mentioned TechShop, this project would work on any other laser cutter.

I dont belong to TechShop anymore since I moved to a city that doesnt have one, but I have never seen a better or more professional workshop than TechShop.

I also have my own laser cutter now:-) Post Comment Categories Circuits.